- 24 -
FOCS Workshop Manual_cod. 1.5302.351_7° ed_ rev. 06
10 250 300 500 1000 5000 10000
(***)
(**)
(**)
(*)
(*)
(**)
(*)
(*)
(*)
(**)
(**)
(***)
(**)
(**)
(**)
(**)
(°)
(***)
(***)
300
250
33
Important
Failure to carry out the operations described in the table may lead to technical damage to the machine and/or system.
Engine oil replacement.
Oil filter replacement.
ORDINARY MAINTENANCE
AFTER THE FIRST
50 WORKING HOURS
ORDINARY MAINTENANCE
OPERATION DESCRIPTION
FREQUENCY x HOURS
CHECK
REPLACEMENT
OVERHAUL
ENGINE OIL LEVEL
COOLANT LEVEL
AIR FILTER (DRY-TYPE)
RADIATOR EXCHANGE SURFACE
VALVE CLEARANCE ADJUSTMENT
FAN / ALTERNATOR
BELT STRETCH
COOLING LIQUID HOSES
SETTING AND INJECTORS CLEANING
FUEL PIPES
RUBBER INTAKE HOSE (AIR FILTER AND
INTAKE MANIFOLD)
INTERIOR RADIATOR CLEANING
ALTERNATOR AND
STARTING MOTOR
ENGINE OIL
OIL FILTER
FUEL FILTER
ALTERNATOR BELT
COOLANT
FILTER ELEMENT PANEL AIR FILTER
FUEL PIPES
COOLING LIQUID HOSES
RUBBER INTAKE HOSE (AIR FILTER AND
INTAKE MANIFOLD)
TIMING BELT
DRY AIR CLEANER EXTERNAL
CARTRIDGE
DRY AIR CLEANER INTERNAL
CARTRIDGE
PARTIAL
TOTAL
AFTER 6 CHECKS WITH CLEANING
(*) -In case of low use: every year.
(**) -In case of low use: every 2 years.
(***) -The period of time that must elapse before cleaning or replacing the filter element depends
on the environment in which the engine operates. The air filter must be cleaned and
replaced more frequently In very dusty conditions.
(°) -Once removed, the timing belt should be replaced even if its scheduled motion period is
not over.
EVERY 4000 HOURS
AFTER 3 CHECKS WITH CLEANING
MAINTENANCE - RECOMMENDED OIL TYPE - REFILLING
ENHANCED OIL SUMP
STANDARD OIL SUMP
ROUTINE ENGINE MAINTENANCE
To Next Page
Loading...
Need help?
General
