LUBRICATION AND SERVICE GUIDE
Breal-ln
Normal
Maintenance
and
Lubrication
Period
Period
Operatllng
Maintenance To Be Performed
Operating
Hours
Hours
8-10 60
8-10
60
120 250
500 1000
•
Check engine oil sump level
•
•
Change engine oil
•
•
Change Engine oil filter
•·
•
Check engine radiator coolant level
•·
Change engine radiator coolant
•
•
Check fan V-belt tension
•
Drain
and
clean fuel tank
•
Change primary fuel filter cartridge
•
Change secondary fuel filter cartridge
•
•
Change primary fuel filter bowl
•
•
Clean fuel pump filter
•
•
Check oil level
in
air cleaner sump
•
Clean air filter sump and element, change oil
•
Remove air filter assembly, disassemble and clean
•
Adjust clutch pedal free play and the control lever
~
Adjust brake pedal free play
•
Change power steering oil and clean filter
•
(Hydrostatic steering)
•
Check oil level of front drive axle differential (DTC only)
•
•
Check oil level of front drive wheel's planetary system
•
(DTC only)
•
Change oil of front drive axle differential (DTC only)
•
•
Check o1llevel of transmission housing
•
Change oil
in
transmission housing
•
•
Change oil of front drive wheel's planetary system
•
(DTC only)
•
Change oil of front drive axle reduction gearbox
..
(OTC only)
•
Change hydraulic system filter element
•
•
Check tire pressures
•
•
Check level of battery electrolyte
•
•
Lubricate tie rods
•
•
Lubricate steering knuckle pivot
•
··
•
Lubricate front axle pivot
..
•
Lubricate clutch release bearing
•
•
Lubricate brake shaft
..
•
Lubricate three point hitch and hydraulic lift mechanism
•
•
Lubricate front U-joint (OTC only)
..
•
Lubricate front axle pivot (DTC only)
•
•
Check tightness of all bolts, nuts, fittings and unions.
•·
Torque to proper value.
•
Have dealer check valve clearance
and
torque head
•
bolts
•
Lubricate front Kingpins (DTC only)
•
30
To Next Page
Loading...
