Long 2360 - Page 43

After every 60 hours, lubricate the front spindles. There
is one fitting on each side.
Fig. 67 - Steering Knuckle Pivots
After every 60 hours, lubricate the front axle pivot.
There is one fitting.
Fig. 68 - Front Axle Pivot
After every 60 hours, lubricate the clutch release bear-
ing. There is one fitting.
Fig. 69 - Clutch Release Bearing
41
After every 60 hours, lubricate the brake pedal shaft.
There is one fitting on the right hand side. Also lubricate
the clutch pedal shaft. There is one fitting on the left
hand side.
Fig. 70 - Brake Pedal Shaft
After every 60 hours, lubricate the three point hitch
system. There are six fittings.
Fig. 71- Three Point Hitch
After every 60 hours, lubricate the remote control valve
lever. There is one fitting.
I