Basic Setup4
5. Insert the security screw through the fasteners on the top of the camera base and mounting
bracket to secure the camera to the mounting bracket. Tighten using the included screwdriver
(item A+B in toolkit).
LWB4800 / LWB4900 Series LWB5800 / LWB6800 Series
6. OPTIONAL: Tighten the pre-installed locking screw on the base of the Power Pack using the
included screwdriver (item A+B in toolkit).
NOTE
You will need to loosen the locking screw to remove the Power Pack in the future.
7. Adjust the angle of the camera:
LWB4800 / LWB4900 Series LWB5800 / LWB6800 Series
Twist the adjustment ring counterclockwise to repo-
sition the camera. Tighten the adjustment ring when
finished.
A. Adjustment ring
Use the included Allen Key (item D in toolkit) to
loosen the adjustment screws labelled below. Tighten
all adjustment screws when finished.
A. Camera levelling
B. Arm angling
C. Arm rotation
#LX400109; r. 5.0/56381/56402; en-US 12
To Next Page
Loading...
