28
Performing a Test - Gardner:
Note: Ensure that the sample being measured is free from turbidity; if
necessary, filter the sample through a 0.45 micron filter paper.
1 - Insert the cell divider in the
groove in the sample chamber as
shown.
2 – Fill a clean Cell 2/3 full with the
sample.
3 - Place the cell in the sample
chamber of the EC2000 Gardner, on
the left hand side of the cell divider.
4 - Close the sample lid and press
the test key on the keypad or the
display.
5 - While performing a test, the
instrument will display:
To Next Page
Loading...
