Warranty
The warranty card is supplied as a separate document.
Compliance statements
This equipment complies with:
• CE under 2014/53/EU Directive
• The requirements of level 2 devices of the Radio communications
(Electromagnetic Compatibility) standard 2008
About this manual
This manual is a reference guide for operating the following Hook
2
X
models: 4x GPS, 4x Sonar, 5x GPS HDI, and 7x GPS HDI.
These units are only capable of the sonar views and frequencies
indicated in the specification included in the transducer’s installation
guide for the transducer provided with the unit. The model is
provided on the front of the unit. The following is a list of the
models, the transducer which should be used and the sonar
functionality available.
• 4 X Sonar and 4 X GPS: The Bullet transducer should be used
which provides traditional sonar functionality only.
• 5 X GPS HDI and 5 X GPS HDI: The SplitShot transducer should be
used which provides traditional sonar and DownScan
functionality.
Transducers added via one of the optional transducer adapter
cables will still only have the available views and frequencies that
the display is designed to work with. Airmar transducers are not
supported via the adapter cable.
In the manual, important text that requires special attention from
the reader is emphasized as follows:
Ú
Note: Used to draw the reader’s attention to a comment or
some important information.
Preface | Hook² X Series Operator Manual
To Next Page
Loading...
Need help?
General
