LP Technologies LPT-3000 - 2-2. Power Requirements

Page | 10
Chapter 2. Preparation for Use
2-1. Initial Inspection
Please inspect the box contents and make sure all items listed are included. Keep the
shipping box and all packing materials until the inspection of the LPT 3000 Spectrum
Analyzer is complete.
Table 2-1 (below) shows all accessories offered with the LPT-3000 Spectrum Analyzer.
Please contact LP Technologies Customer Support for any damaged parts, missing items,
or any other issue that you may need assistance with.
To clean the surface of the unit, please use a wet/dry cloth. Do not clean the inside of
the case.
Accessories
Note:
Operation Manual CD
Included in the package
Power Cable (AC Power Cable 3 Holes)
Included in the package
[Table 2-1] Accessories offered with the LPT 3000 Spectrum Analyzer
2-2. Requirements for Power
The LPT 3000 does not need any additional external devices; use only the power cord provided.
For more information, see Table 2-2 below.
[Table 2-2] Requirements for AC Power
Input Voltage
100 - 120 VAC ( 50 - 60 Hz )
Input Voltage
220 - 240 VAC ( 50 - 60 Hz )
Power Consumption
When Using
Less than 80W
In order to prevent electrical shock, please unplug the power cord from the main
power supply on the back of the spectrum analyzer before cleaning.
WARNING !