Page | 46
■
Delete
This deletes a file in the memory of the analyzer.
■
Copy
This copies a file to other directories of the internal analyzer or the USB flash
memory.
■
Rename
This allows you to change a file name.
■
Create Dir
This creates a new directory in the internal memory of the analyzer.
5-5. FREQUENCY
This activates the center frequency set-up function, and displays the menu of the frequency
function. Frequency values are show below each specific function in the soft key menu. It is not
recommended to enter frequencies larger than the frequency span of the spectrum analyzer.
■
Center Freq
This sets the Center Frequency using the step keys, scroll knob, and the numeric
keypad.
FREQUENCY >> Center Freq
■
Start Freq
This sets the start frequency. The left and right of the lattice conform to the start
and stop frequencies. The Start Frequency can be changed by using the step keys,
scroll knob, or the numeric key pad. If you press any number from 0 ~ 9 on the
number key pad, a unit menu will appear.
FREQUENCY >> Start Freq
■
Stop Freq
This sets the Stop Frequency. The left and right of the lattice conform to the start
and stop frequencies. The Stop Frequency can be changed by using the step keys,
To Next Page
Loading...
