Page | 53
■
Mkr → Ref Lvl
This sets the analyzer so that reference level can be the amplitude of a marker. On
delta mode, Mkr → Ref Lvl sets the reference level as the difference of amplitudes
between markers.
MARKER → >> Mkr → Ref Lvl
5-9. Meas Control
This enables you to temporarily stop the power measurement function usable on the measure
key menu, or resume it. Also, the Meas Control enables you to select continuous sweep or single
sweep.
■
Restart
This repeats measurement from the beginning.
MEAS CONTROL >> Restart
■
Measure Cont Single
Measure(Single) indicates the measurement result through a one-time
measurement sweep.
Measure(Cont) successively performs measurement, and shows the result for every
measurement sweep.
MEAS CONTROL >> Measure
■
Pause
This temporarily stops measurement. If you press Pause, it makes conversion
between the temporary pause of measurement and resume.
The key label makes conversion between Pause and Resume.
MEAS CONTROL >> Pause
■
Resume
This resumes the temporarily suspended measurement. The key label makes
To Next Page
Loading...
