LP Technologies LPT-3000 - 1-1. Product Specifications

Page | 6
Chapter 1. Product Specifications
1-1. Product Specifications
Frequency
► Range : 9 kHz to 3.0 GHz
► Resolution : minimum 1 Hz
► Span Range : 100 Hz / div to 300 MHz / div
Selection of 1,2,5 steps (automatic), ZERO Span, FULL Span (9 kHz to
3.0 GHz)
► Frequency Selection : Start, Stop, Center, Span set-up
► Span Accuracy : ±3 % of the Indicated Span Width
► Readout Accuracy : ≤±(Indicated frequency × Reference frequency accuracy +
Span
× Span accuracy + 50% of RBW)
► Phase Noise : ≤−90 dBc/Hz @10 kHz offset
Amplitude
► Range : +20 dBm ~ −105 dBm
► Avg. Noise Level (1 kHz RBW, 10 Hz VBW)
≤−105 dBm : 150 kHz ~ 1 GHz
≤−100 dBm : 1 GHz ~ 2.4 GHz, 50 kHz ~ 150 kHz
≤−95 dBm : 2.4 GHz ~ 3 GHz
► Amplitude Unit : dBm, dBmV, dBuV, V, mV, uV, W, mW, uW
► Display Scale Linearity
≤±1.5 dB / 70 dB (10 dB / div), ≤±1.5 dB / 40 dB (5 dB / div)
≤±0.5 dB / 8 dB (1 dB / div), ≤±0.5 dB / 16 dB (2 dB / div)
► Frequency Response (0 dB attenuation) : −3.5 dB ~ 1.5 dB (100 kHz ~ 10 MHz)
±1.5 dB (10 MHz ~ 3 GHz)
► Reference Level
Range : −90 dBm to +20 dBm
Resolution : 0.1 dB step
Accuracy : ±1.5 dB