Page | 61
SPAN >> Zero Span
■
Last Span
This changes the frequency span of the analyzer to the previous span.
SPAN >> Last Span
5-19. Sweep
This Accesses the sweep time menu and accesses the sweep-time soft key functions.
■
Sweep Time Auto Man
This sets the length of time in which the spectrum analyzer sweeps the frequency
span. If the sweep time is reduced, the sweep speed increases. The sweep time can
be changed by using the step keys, scroll knob, or the numeric key pad.
SWEEP >> Sweep Time
■
Sweep Cont Single
This switches between continuous sweep mode and single sweep mode. If you
press Sweep (Single), the analyzer will run a single sweep; when Sweep (Cont) is
selected, one sweep will follow the other according to the PRESET SPECTRUM.
SWEEP >> Sweep
5-20. System
The System menu appears.
■
Power On Preset
If you press the Power On Preset button, the following menus will appear.
▪ Power On Last Preset
This determines the state of the analyzer when you turn it on. This function
To Next Page
Loading...
