Page | 51
activated, press Marker Trace Auto 1 2 3 until there is an underline on 1, 2, or 3. The current
activated marker will move to the selected trace. If you select Auto mode, the marker will
automatically move to the selected trace.
MARKER >> Marker Trace
■
Readout
This changes the activated marker value.
▪ Frequency
This sets the marker value as a frequency. It is a basic value when it is not on
zero span.
▪ Period
This sets the marker value as a period. It shows the reverse value of the
frequency.
▪ Time
This sets the marker value as a time. It is a basic value when it is on zero span.
MARKER >> Readout
■
Marker Table On Off
This shows a marker table on the display. The information includes marker number,
trace number, X axis value, and the amplitude.
MARKER >> Marker Table
■
Marker All Off
This turns off all markers. Also, it deletes the marker indication.
MARKER >> Marker All Off
5-8. Marker →
■
Mkr → CF
This sets the marker frequency as the center frequency. On Delta marker mode, Mkr →
CF sets the center frequency as the marker delta value. Mkr → CF cannot be used when
To Next Page
Loading...
