Page | 50
■
Delta
The second marker is activated on the location of the first marker.
(
When there is
no marker, two markers appear on the center of the display.) The amplitude and
frequency of the first marker are fixed. The marker number is indicated on the Delta
marker, and the same number is indicated on the standard marker as R.
(
For
instance, 1R
)
The indications on the activated function block and the right of the
display show the difference between the frequency and amplitude of the two
markers.
MARKER >> Delta
■
Delta Pair Ref Delta
This converts to a mode that allows the two markers to be independently adjusted.
When you press Delta Pair, there is a conversion between Reference marker and
Delta. The reference marker number is indicated on the marker as R, (for instance,
1R) and Delta marker is indicated as a marker number.
MARKER >> Delta Pair
■
Span Pair Span Center
This converts to a mode that allows the two markers to be independently adjusted.
If you press Span pair, there is a conversion between the span and the center
marker. The reference marker number is indicated on the marker as R, (for instance,
1R) and Delta marker is indicated as a marker number. If you adjust the span, the
difference between the two markers will be changed. If you change the center, the
center point of the two markers will be changed.
MARKER >> Span Pair
■
Off
Turns OFF the Marker function and removes the marker indication on the display.
MARKER >> Off
■
Marker Trace Auto 1 2 3
This designates a marker on a trace. If you press Marker Trace Auto 1 2 3, a marker
on trace 1 will be activated when there is no marker on. While the marker is currently
To Next Page
Loading...
Need help?
General
