Page | 17
3-2. Rear Panel Overview
[Figure 3-2] Outline of the Functions of the Rear Panel
1.
Ventilation fan is installed to discharge heat generated inside the analyzer.
2.
External trigger input connector
3.
Ethernet connection interface
4.
RS－232C connection interface
5.
AC main power switch (including fuse/spare fuse)
6.
Input/Output connector for standard frequency. This port is activated by
pressing the I/O DETECT button in the CONTROL section on the front panel of
the unit.
7.
Ground connection
8.
GPIB connector
To Next Page
Loading...
