Page | 52
it is on zero span.
MARKER → >> Mkr → CF
■
Mkr → CF Step
This changes the scale of the center frequency step so that it can match the
activated marker value. In order to see the scale of the step, please press
FREQUENCY >> CF Step. As for marker delta mode, the scale of the step is
established as the difference between a marker and the frequency. Mkr → CF Step
cannot be used when it is on zero span.
MARKER → >> Mkr → CF Step
■
Mkr → Start
This sets the marker frequency as the start frequency. On delta marker mode, Mkr
→ Start sets the start frequency as the marker delta value. Mkr → Start cannot be
used when it is on zero span.
MARKER → >> Mkr → Start
■
Mkr → Stop
This sets the marker frequency as the stop frequency. On delta marker mode, Mkr
→ Stop sets the stop frequency as the marker delta value. Mkr → Stop cannot be
used when it is on zero span.
MARKER → >> Mkr → Stop
■
Mkr Delta → Span
This sets the start and stop frequencies as the delta marker. Mkr Delta → Start
cannot be used when the marker is off, or is on zero span.
MARKER → >> Mkr Delta → Span
■
Mkr Delta → CF Step
This sets the difference between markers as the scale of the center frequency. If you
want to see the scale of the step, please press FREQUENCY >> CF Step. Mkr Delta →
CF Step cannot be used when the marker is off, or is on zero span.
MARKER → >> Mkr Delta → CF Step
To Next Page
Loading...
