Page | 7
► Second Harmonic Distortion : ≤−60 dBc, −40 dBm input
► Intermodulation Distortion : ≤−70 dBc, −40 dBm input
► Residual Spurious : ≤−85 dBm (Input terminated, 0 dB attenuation)
► Other Input Spurious : ≤−60 dBc, −30 dBm input
► Resolution Bandwidth
Selections : 1 kHz, 3 kHz, 10 kHz, 30 kHz, 100 kHz, 300 kHz, 1 MHz, 3 MHz, 9 kHz, 120 kHz
Accuracy : ±20 %
Selectivity : 60 dB / 3 dB ratio < 15 : 1
60 dB / 6 dB ratio < 12 : 1 (9 kHz, 120 kHz)
Switching Error : ≤±1.0 dB (1 kHz Reference RBW)
Video Bandwidth : 10 Hz to 3 MHz in 1-3-10 step
Sweep
► Time : 100 ms to 1000 sec, 40 ms to 1000 sec (zero span)
► Accuracy : ≤±20 %
► Trigger Source : External (rear), Video, Free run, Line
► Trigger Mode : continuous, single
► Trigger Level : TTL level
Storage
► Trace Storage : maximum 900 waveforms
► Setup Storage : maximum 3,000 states
Screen Display
► Type : 6.4″ color TFT LCD screen
► Display Resolution : 640
(
H
)
× 480
(
V
)
active display area
► Marker Mode : Peak search, Delta marker, Marker to Center,
Marker to Reference (8 markers maximum)
Input
► RF Input Connector : N-type Female, 50 Ω nominal
► VSWR : 150 kHz to 3.0 GHz, VSWR < 1.5 : 1 (with 0 dBm Ref Level)
► Maximum Input Level : 0 Vdc, +20 dBm
To Next Page
Loading...
Need help?
General
