Page | 8
Standard Frequency (10 MHz, Ref.)
► Temperature Stability : ±0.5 ppm
► Aging : ±0.5 ppm / Year
► Connector : BNC female
► Input Level : −5 dBm to +15 dBm
► Output Level : 10 MHz, +8 dBm nominal
Interface
► RS-232C
► Printer
Driver : PCL3 or PCL5, HP, EPSON, Laser-Jet, Desk-Jet etc. supports most printers
Connector : Standard 25 pin female D-Sub parallel printer, supports USB
► USB 2.0 Host
Printer Driver : Supports most printers including HP, EPSON, Laser-Jet, Desk-Jet, etc.
USB Storage Device : supports 1.1, 2.0, for storing image files, supports GIF format
► Ethernet (Option)
10-Base-T Ethernet : supports Internet remote control
► GPIB Interface (Option) : IEEE 488 bus
General Specifications
► Size : 350 (width) × 195 (height) × 375 (length) mm
► Weight : 10 kg
► Warm-up Time : More than 20 minutes for precise measurement
► Power
Supply Electrical Power : 100-240 VAC at 50 / 60Hz
Consumption Power : 80 watts maximum (without additional built in options)
► Operating Temperature : 0 ℃ to 40 ℃
► Temperature for Storage : −20 ℃ to 70 ℃
► RF Emissions, Immunity
RF emissions : EN 550011
To Next Page
