Page | 45
When changing a directory to save in, please change the location by using the Dir
Select menu key and the step keys.
▪ State
The state file saves the set-up of the device. You can save the analyzer state in
the memory with State.
▪ Trace
Trace can be saved independently or along with the analyzer state. Although
CSV type can be read in a form of a spread sheet of the PC, it cannot be drawn
to the analyzer. If you save trace 1, 2, or 3, the trace selected can be saved
along with the state. If you save the trace as All, the traces are all saved along
with State in a .trc single file.
▪ Screen
This enables you to save a screen image on a file, and to select GIF and Reverse
GIF file format. The screen image cannot be read with the analyzer.
■
Load
You can load the analyzer state and trace from the internal memory to the analyzer.
If you intend to load a file, please perform the following steps:
7. Select a file to load by using the step keys. You cannot load a GIF file by the
analyzer. As for trace files, please select trace 1, 2, or 3 on Destination.
8. If you are ready to load, please press the Load Now menu key.
▪ State
The state file includes the set-up of the analyzer. If you load the state, a
previous state of the analyzer is restored.
▪ Trace
A Trace can be loaded along with the analyzer state when saved. If you load a
Trace, it will be in View mode and will default to Trace 1 unless you load all
three traces, which will return you to the State in which each Trace was saved.
To Next Page
Loading...
