Page | 66
■
Min Hold
The Min Hold function displays and continuously updates the trace to display the
lowest amplitude of signal level.
TRACE >> Min Hold
■
View
The View function freezes the trace and displays trace information. The trace
information is not updated even after a seep. To return to a continuous trace, press
the “Clear Write” key.
TRACE >> View
■
Blank
This saves amplitude data on the selected trace, and deletes it on the display. The
trace memory selected will not be renewed even after sweep. This function will be
applied to trace 2 and 4 when inputting AC power.
TRACE >> Blank
To Next Page
Loading...
