pg. 16
PRINT key immediately sends printing data to a printer.
8.
The power button turns ON/OFF the LPT-6000 Spectrum Analyzer. The Green light
indicates the unit is ON and the Red light indicates it is in a STANDBY mode. The
main power switch on the back of the unit must be ON to operate the unit. When
the unit is ON, press and hold the POWER button for 3 seconds to turn it OFF.
9.
USB interface for USB Flash memory stick or USB printer cable.
10.
Tracking Generator or CDMA Signal Generator input connector (Optional).
11.
RF signal input connection.
A data controlling keys including a step key, a knob, and a number key pad allow the
user to change the numeric value of an active function. Turning the knob clockwise
increases values while counter-clockwise decreases values. All controlling keys can
be uses concurrently. For example, the values for the central frequency may be
adjusted by using the knob, by punching new values using the key pad or by using
the step keys to increase or decrease the values.
The knob makes it possible to successfully change values for functions such as
central frequency, reference level, and a marker location. The scope of the
adjustment will be determined by the scale of the scope of measurement. The
number key pad is used to input precise values.
To Next Page
Loading...
Need help?
General
