pg. 64
numeric keypad, than press Enter. The effective time values
(
HH
)
are 00 ~ 23.
The effective MM and SS values are 00 ~ 59.
SYSTEM >> Time/Date >> Set Time
▪ Set Date
It sets a date. Please enter a date in YYYYMMDD format by using the numeric
keypad, than press Enter. The effective YYYYs are from 2000 to 2037. The
effective MM value is 01 ~ 12, and the DD is 01 ~ 31. Use the following keys.
SYSTEM >> Time/Date >> Set Date
■
Alignments
It enables you to accurately acquire frequency and level by arranging the internal
circuit of the analyzer.
▪ Align Now
It immediately starts the arrangement of a system.
SYSTEM >> Align Now
▪ Align Auto
Arrangement work of the analyzer will be automatically made every 30 minutes.
SYSTEM >> Align Auto
■
Show System
There are the model number, serial number, firmware version, the version of each
board within the device, and the state of the set-up of an option of the analyzer.
SYSTEM >> Show System
■
Diagnostics
▪Front Panel Test
It enables you to check the function of keys on each front panel. Whenever you
press the key, the number beside the name of each key will be increased. If you
turn a knob, the number of pulse will be counted. If you intend to terminate it,
please press Esc.
To Next Page
Loading...
