Chapter 7 I/O Module
7-24
7.6 Smart Link
7.6.1 Smart Link Connectable Module
The connectable digital modules used for XGK series to Smart Link are as follows.
Model Specification No. of Pins
XGI-D24A/B 32-point DC input module 40-pin Connector×1
XGI-D28A/B 64-point DC input module 40-pin Connector×2
XGQ-TR4A 32-point TR output module (sink type) 40-pin Connector×1
XGQ-TR4B 32-point TR output module (source type) 40-pin Connector×1
XGQ-TR8A 64-point TR output module (sink type) 40-pin Connector×2
XGQ-TR8B 64-point TR output module (source type) 40-pin Connector×2
XGH-DT4A
16-point DC input / 16-point TR output
combination module
40-pin Connector×1
Some models are ready for Smart Link. For details, refer to the attached data sheet that comes with the
Smart Link module.
Classification Model Specification
Terminal board SLP-T40P 40-pin terminal
Relay board SLP-RY4A, RY4B 32-point relay
SLP-C101-XG 1m cable
Cable
SLP-C201-XG 2m cable
7.6.2 Smart Link Connection
Extension cable (SLP-C101-XG, SLP-C201-XG)
Terminal board (SLP-T40P)
Relay board (SLP-RY4A)
To Next Page
Loading...