Laser Technology, Inc. LTI 20/20 TruSpeed User’s Manual
Page 16
Section #2 - Speed Measurements
When you power ON the TruSpeed the instrument will perform the Self Test.
Figure #12 shows successful completion of the Self Test. See page 30 for more
information about the Self Test.
The next screen is automatically displayed and should look similar to Figure #13.
• The dashes that appear in the upper display indicate where the
speed measurement will appear.
• “MPH” means the speed will be measured in miles per hour.
• The dashes that appear in the lower display indicates where the distance
to the target vehicle will appear.
• "F" means the distance will be measured in feet.
• The Battery Icon indicates the approximate battery voltage
level (page 9).
To Next Page
Loading...