Lucent Technologies MERLIN LEGEND Release 6.1 System Programming And Maintenance

MERLIN LEGEND Communications System Release 6.1
System Programming and Maintenance (SPM)
555-661-140
Issue 1
August 1998
Programming with SPM
Page 11
Installing the SPM Software
8. If the print.exe file was copied to your PC in Step 5, you must
reboot your PC.
9. You should now configure a PIF file for SPM. Use the instruc-
tions that follow.
Configuring a PIF file for DOS SPM
Refer to the Windows 95 Help topic, “PIF editor,” for details about using
the PIF editor to implement an SPM PIF file to work with the spm.exe
file.
Configure a PIF file for DOS SPM by doing the following:
1. In the Windows Explorer, select the SPM application file. Then
select the menu item File:Properties. The screen that pops up
will have tabs along the top.
2. In Program Tab:, put the following line in the Working
Directory entry:
&?630
3. In Program Tab:, put the following line in the Batch File entry:
&?630?630%$7
4. In Program Tab:, make sure the Close on Exit checkbox is
checked.
You can now double-click on either the SPM application icon or the SPM
“Shortcut to MS-DOS” icon to run SPM. When you quit SPM (by
pressing the Home key), the window closes automatically.
Hiding the spm.exe and spm.bat Files
If you want to hide the spm.exe and spm.bat files, use the following
steps:
1. In the Windows Explorer, select each file.

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General

Brand	Lucent Technologies
Model	MERLIN LEGEND Release 6.1
Category	Conference System
Language	English