Lucent Technologies MERLIN LEGEND Release 6.1 System Planning

MERLIN LEGENDCommunications System Release 6.1
System Planning 555-661-112
Issue 1
August 1998
Features
Page 4-17Telephone and Extension Features
4
Planning Form Instructions 4
Determine which stations will be assigned as Service Observers and complete the
following on page 1 of Form 4d and 5b:
■ In the Centralized Programming Requirements section, check the Assign
Service Observing Button box for each MLX telephone that will have a
Service Observing button assigned. Any station with a programmed
Service Observing button may be assigned as an Observer station.
Determine the number of Service Observing groups needed. Then, for each
group, complete the following on Form 11:
1. Write the group number in the Group No. space.
2. Write the extension number for the group Observer in the Observer Ext.
No. space. The Observer’s station must have a Service Observing button.
3. Check the appropriate option under the Warning Tone heading.
■ To keep the factory-set option and provide a warning tone to indicate
that the station is being monitored, check the Yes box.
■ If a warning tone will not be provided when a station is being
monitored, check the No box.
4. Write the extension number for each group member in the Member Ext.
No. column.
5. Write each Service Observing group member’s name in the Member Name
column.

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General

Brand	Lucent Technologies
Model	MERLIN LEGEND Release 6.1
Category	Conference System
Language	English