MERLIN LEGENDCommunications System Release 6.1
System Planning
555-661-112
Issue 1
August 1998
NI-1 BRI Provisioning
Page H-19Northern Telecom DMS-100 Switch Translations
H
Northern Telecom DMS-100 Switch
Translations H
For the Northern Telecom DMS-100 switch, Capability Package “S” includes
alternate voice/circuit-switched data on two B-channels. It also supports Calling
Number Identification on data and voice connections. Please note that the
assignment of two DNs is required for this package.
The DMS-100 switch also allows alternate voice and data hunting on one DN
through the Multiline Hunt Group feature.
ISDN Capability Package "S" H
The information listed below provides the DN translations that define Capability
Package “S”, and the commands that must be executed.
ISDN Ordering Code: Capability S H
Provision DN1 using the following translations H
Define a new Logical Terminal Identifier (LTID) using the SLT command:
SONUMBER <<cr> or $>
LTID <
enter identifier value
>
LTCLASS <BRAFS>
CS <Y>
PS <N>
MAXKEYS <64>
TEI_TYPE <DTEI>
ABS <NOPMD>
ABS <$>
EKTS <N>
SPIDSFX option
SPID_SUFFIX<
enter spid suffix value
>
PVC option
VERSION <FUNCTIONAL>
ISSUE <2>
To Next Page
Loading...
