Lucent Technologies MERLIN LEGEND Release 6.1 - Group Calling

MERLIN LEGEND
®
Communications System Release 6.1
Form 7d-1
Group Calling*
Maximum: 32 groups. (Make a copy of this form for each group.)
Group Number (1–32)
†
_______________________ Group ID
†
__________________________________
Factory-Set Ext. No. __________________________ Renumber to _________________________
(See Form 2d)
Provide coverage for Coverage Group Numbers __________________________________________________
* Before adding to a calling group when programming, you must first remove trunks from the QCC.
† If the system has AUDIX Voice Power/FAX Attendant System, fill in only the Group Number and Group Name here, then fill in the
rest of the Group Calling information on Forms B & C of the AUDIX Voice Power planning forms.
Extensions
Ext.
No.
1
2
3
4
5
Person or
Location
Ext.
No.
6
7
8
9
10
Person or
Location
Ext.
No.
Person or
Location
Ext.
No.
11
12
13
14
15
Person or
Location
16
17
18
19
20
Trunks/Pools
Form 7d