Lucent Technologies MERLIN LEGEND Release 6.1 System Planning

DS1 Connectivity Ordering
Page E-1
E
MERLIN LEGENDCommunications System Release 6.1
System Planning 555-661-112
Issue 1
August 1998
E
E
DS1 Connectivity Ordering
After the contract is signed, the sales representative or authorized dealer contacts
the DS1 connectivity vendor to discuss the T1/PRI service order. The vendor
needs information about the communications system as well as customer
identification. Table E–1
describes the kind of information the vendor requires.
This table should be reviewed with the customer’s network representative or
dealer so the information will be available when needed.
Table E–1. Guide to DS1 Connectivity Ordering
Digital PBX E
o Has the EIA standard CISA transmission path
o Is senderized
o Is the equipment that must be timed
o Has an internal stratum clock level of 4
o Provides automatic call distribution through Group Calling feature
o Provides loopback (keep signal alive) through CSU
Communications System
Manufacturer AT&T
Model MERLIN LEGEND
Type (Mode) digital PBX
Jack Type RJ48C or RJ48X
Facility Interface Code Digital D4 Framing
Digital ESF Framing
Digital ESF and B8ZS

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General

Brand	Lucent Technologies
Model	MERLIN LEGEND Release 6.1
Category	Conference System
Language	English