Lucent Technologies MERLIN LEGEND Release 6.1 System Planning

MERLIN LEGENDCommunications System Release 6.1
System Planning 555-661-112
Issue 1
August 1998
Prior Releases: Features and Enhancements
Page xxxviRelease 3.1 Enhancements (March, 1996)
Default Pool Dial-Out Code
Restriction for All Extensions 0
The default setting for the pool dial-out code restriction (Hybrid/PBX mode only) is
restricted. No extension or remote access user with a barrier code has access to
pools until the restriction is removed by the system manager.
Default Outward Restrictions for VMI Ports 0
Ports assigned for use by voice messaging systems (generic or integrated VMI
ports) are now assigned outward restrictions by default. If a voice messaging
system must be allowed to call out (for example, to send calls to a user’s home
office), the system manager must remove these restrictions.
SECURITYlALERT:
!
Before removing restrictions, it is strongly recommended that you read
Appendix A, “Customer Support Information.”
Default Facility Restriction
Level (FRL) for VMI Ports 0
The default Automatic Route Selection (ARS) FRL for VMI ports is 0, restricting all
outcalling.
Default for the Default Local Table 0
The default Automatic Route Selection (Hybrid/PBX mode only) FRL has changed
to 2 for the Default Local table. System managers can easily change an extension
default of 3 to 2 or lower in order to restrict calling. No adjustment to the route FRL
is required.
New Maintenance Procedure for
Testing Outgoing Trunks 0
Technicians must enter a password in order to perform trunk tests.
SECURITYlALERT:
!
The enhancements in Release 3.1 help increase the security of the MERLIN
LEGEND System. To fully utilize these security enhancements, be sure to
read and understand the information in the upgrade notes and in the
relevant system guides.

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General

Brand	Lucent Technologies
Model	MERLIN LEGEND Release 6.1
Category	Conference System
Language	English