Model 3030 & 3030E Series Technical Manual Section 5
Ludlum Measurements, Inc. Page 13 November 2017
Warning!
The operator is strongly cautioned to take the following
precautions to avoid contact with internal hazardous live parts
that are accessible using a tool:
1. Turn the instrument power OFF and disconnect the power
cord.
2. Allow the instrument to sit for one minute before accessing
internal components.
CAUTION, RISK OF ELECTRIC SHOCK (per ISO 3864, No. B.3.6)
– designates a terminal (connector) that allows connection to a voltage
exceeding one kV. Contact with the subject connector while the instrument
is on or shortly after turning off may result in electric shock. This symbol
appears on the rear panel of the Model 3030E only.
The “crossed-out wheelie bin” symbol notifies the consumer that the
product is not to be mixed with unsorted municipal waste when discarding;
each material must be separated. The symbol is placed near the AC
receptacle. See section 8, “Recycling,” for further information.
Replacement of Main Fuse (Back Panel)
Warning!
For continued protection against risk of fire, replace only with
fuse of the specified type and current rating!
To Next Page
Loading...
Need help?
General
