LUDLUM 3030E-2 User Manual

Model 3030 & 3030E Series Technical Manual Section 7
Ludlum Measurements, Inc. Page 20 November 2017
Computer Software
he Model 3030 Control Software allows the user to set all
parameters, view QC Check settings, run high voltage plateaus,
perform MDA (Minimum Detectable Activity), and retrieve the
sample data saved to the logging memory. Certain parameters can
be protected by a password to prevent changes that could affect the
calibration of the instrument.
When the software is started, a dialogue is displayed allowing the user to
manually select the Comm port or to have the software select it
automatically. The software will only search Comm ports 1-16. After the
Model 3030 is found, the parameters are downloaded from the instrument
and the main screen is displayed. The main screen consists of a tabbed
interface separating the various functions and include General Settings, QC
Check, HV Plateau, MDA Calculation, and Data Logging.
Section
7
T

LUDLUM 3030E-2 Specifications

General

Brand	LUDLUM
Model	3030E-2
Category	Measuring Instruments
Language	English