LUDLUM 3030E-2 User Manual

Model 3030 & 3030E Series Technical Manual Section 7
Ludlum Measurements, Inc. Page 37 November 2017
1 = Read alpha ratemeter MDA.
2 = Read beta ratemeter MDA.
3 = Read alpha scaler MDA.
4 = Read beta scaler MDA.
RP – Read the PC Time
Reads the PC or user-defined count time in seconds. The PC time is used
when the COUNT TIME SWITCH on the front panel is set to PC.
Returns nnnnn.n.
RQn
Reads the specified QC parameter.
01 = Read QC enabled status. Returns ON or OFF.
02 = Read current alpha efficiency %. Returns nn.
03 = Read current beta efficiency %. Returns nn.
04 = Read standard alpha efficiency %. Returns nn.
05 = Read standard beta efficiency %. Returns nn.
06 = Read alpha source size (cpm). Returns nnnnnn.
07 = Read beta source size (cpm). Returns nnnnnn.
08 = Read alpha efficiency limit %. Returns nn.
09 = Read beta efficiency limit %. Returns nn.
10 = Read alpha background upper limit (cpm). Returns nnnnnn.
11 = Read alpha background lower limit (cpm). Returns nnnnnn.
12 = Read beta background upper limit (cpm). Returns nnnnnn.
13 = Read beta background lower limit (cpm). Returns nnnnnn.
14 = Read last QC date. Returns MM/DD/YYYY.
15 = Read alpha background (cpm). Returns nnnnnn.
16 = Read beta background (cpm). Returns nnnnnn.
17 = Read last QC time. Returns HH:MM.
18 = Read QC Mode. Returns NOR, BKG, or MAN.
19 = Read QC Update Mode. Returns OFF, ON, EFF, or SUB.
20 = Read alpha source count time (secs). Returns nnnnn.n.
21 = Read beta source count time (secs). Returns nnnnn.n.
22 = Read background count time (secs). Returns nnnnn.n.
23 = Read QC override status. Returns OFF or ON.
RR – Read Count
Reads the current alpha and beta counts. Returns HH:MM MM/DD/YY
aaaaaa bbbbbb x tttt.t.
aaaaaa = alpha count
bbbbbb = beta count
x = S (scaler), C (cpm), and D (dpm)

LUDLUM 3030E-2 Specifications

General

Brand	LUDLUM
Model	3030E-2
Category	Measuring Instruments
Language	English