Lumel P30U series - WWW Server

119
Con-
ductor
no.
Signal
Conductor color acc. to standard
EIATIA 5A EIATIA 5B
1 TX+ white/green white/orange
2 TX- green orange
3 RX+ white/orange white/green
4 EPWR+ blue blue
5 EPWR+ white/blue white/blue
6 RX- orange green
7 EPWR- white/brown white/brown
8 EPWR- brown brown
Table44
5.1.2.  server
The P30U transducer provides its own WWW server
enablingremotemonitoringofmeasuredvaluesandremoteconfigura-
tionaswellasreadingthetransducerstatus.Inparticular,thewebsite
enablesthefollowing:
receiving information about the device (serial number, manufac-
turing variant code, firmware version,bootloader version,variant
(standardorspecialmanufacturingvariant),
viewingcurrentmeasurementvalues
readingdevicestatus,
selectingwebsitelanguage.
ToaccesstheWWWserver,usermustenterthetransducer’s
IP address in the internet browser, e.g.: http://192.168.1.30
(where 192.168.1.30 is the defined transducer’s address). Port “80”
isthestandardWWWserverport.Theportservercanbechangedby
theuser.
Note: Thewebsite requiresabrowserwithJavaScriptswitchedonthat
iscompatiblewithXHTML1.0(allleadingbrowsers, InternetExplorer
version8andhigher).
•
•
•
•