5.5.1.7. Mathematical functions
The P30U transducer can calculate the measured values
usingoneof5implementedmathematicalfunctions:
squareofmeasuredvalue,
rootofmeasuredvalue,
inverseofmeasuredvalue,
inversesquareofmeasuredvalue,
inverserootofmeasuredvalue.
Theoperationofmathematicalfunctionsisswitchedoffbydefault.
5.5.1.8. Input individual characteristic
P30U transducers perform the function of conversion
of the measured value to any value due to implemented function
ofindividualcharacteristicsoftheinput.Independentindividualcharacte-
risticshavebeenimplementedforthemaininputandtheauxiliaryinput.
Theindividualcharacteristicsrescalestheinputsignalbeingmeasured
according to the characteristics set. The user can enter a maximum
of twenty functions each by specifying points determining the ranges
andexpectedvaluesforsubsequentpoints.
Programmingindividualcharacteristicconsistsinthedefinition
of the number of pointswhichthe input function will belinearizedby.
Note that the number of linearized functions is the number of points
minus one. Next, one must program subsequent points by providing
themeasured value Xn and theexpectedvaluecorresponding to it –
thevaluetobedisplayed(Yn).Thevisualinterpretationoftheindividual
characteristicisshownonfig.13.
•
•
•
•
•