Lumel P30U series - 2. TRANSDUCER SET; 3. BASIC REQUIREMENTS, OPERATIONAL SAFETY

8
8
2. TRANSDUCER SET
-P30Utransducer 1pc.
-user’smanual 1pc.
-guaranteecard 1pcs.   
-plug-ablescrewterminalblocks 4pcs.
3. BASIC REQUIREMENTS,
OPERATIONAL SAFETY
ThetransducermeetstherequirementsofEN61010-1standard
intermsofoperationalsafety.
Safety precautions:
The assembly and installation of electrical connections must be
carriedoutbyapersonauthorizedtoinstallelectricalequipment.
Beforeswitchingthetransducer on, one mustcheckthecorrect-
nessofconnections.
Thedeviceisdestinedtobeinstalledandusedinindustrialelectro-
magneticenvironmentconditions.
The building installation should be equipped with a switch
or an automatic circuit breaker located near the device,
which should be easy accessible by the operator and properly
marked.
Removal of the transducer housing during the  warranty period
maycauseitsinvalidation.
•
•
•
•
•