Lumel P30U series - Page 13

14
14
-changedigitkey
displaystheminimumvalueofthemaininput,
enterstheparametersgrouplevel,
navigatestheselectedlevel,
changesthevalueofaselectedparameter–switchestothesub-
sequentdigit,
switching the transducer power supply on while holding this key
enters the software update mode through the RS-485 interface,
connectionparameters:rate15200kb/s,mode8N2.
-cancelkey
enters the transducer parameters preview menu (hold for about
3seconds),
exitsthetransducerparameterspreviewmenu,
changesthecontentdisplayedinthelowerlineofthedisplay,
canceltheparameterchange,
completely cancels the programming mode (hold for about
3seconds).
switching the transducer power supply on while holding the key
forcesreadingtransducerconfigurationfromP30U_PAR.CONfile
storedonanexternalSD/SDHCmemorycardorintheinternalfile
systemmemory(dependingonthemanufacturingvariant).
•
•
•
•
•
•
•
•
•
•
•
Microlectra bv.
Hermanus Boerhaavestraat 6. 3261 ME Oud-Beijerland. Netherlands.
Tel 31(0)186-616290 Fax 31(0)186-610349 www.microlectra.nl info@microlectra.nl