Lumel P30U series - Page 57

58
58
vvvvvv
-loweroverflowoftheinputsignalrange
-upperoverflowoftheinputsignalrange
 ThelowerlineoftheP30Utransducerdisplayismulti-functio-
nal.Press
or keytocyclethroughthefunctions
ofthebottomrowofthedisplay:
unit (selected from the defined units or custom (section 5.4.3,
table3)withtheindicationofinternalmemoryuse
(pkt5.8.2.
table18.)
timeinHH:MM:SSformat
dateinDD:MM:YYformat
bargraphshowingpercentcontroloftheanalogoutput
theseconddisplayedvalue -valueofanytransducer’sregister
asafloatingpointnumber–thenumberofregistertobedisplayed
shouldbeenteredinregister4024(todisplaythefloattyperegister
valuelocatedin16bitregisters,e.g.7000register,enterthenum-
e  2 it eiste cesnin t it → 500.
-
-
•
•
•
•
•
Fig.18. Diagram of switching
information displayed in the lower
line of the display.