Lumens PS660 - Chapter 7 Control Panel;Remote Control and Setting Menu; Functions of Control Panel and Remote Control

English - 17
Chapter 7 Control Panel/Remote Control
and Setting Menu
7.1 Functions of control panel and remote control
<Note>: OSD is not available at C-Video mode. [MENU] / [ROTATE] / [PAN] /
[SOURCE] / [RECORD] / [CAPTURE] / [DELETE] / [VGA] / [SLIDE SHOW]
functions are not available on the machine panel and the remote control.
<Remark> The below functions are listed alphabetically.
Name
Function Descriptions
Operation
Turn on and off the visual presenter.
Remote control /
Control panel
,,,
Move up, down, left or right to select the needed
function.
Remote control /
Control panel
AF
Auto Focus
Remote control
AUTO
TUNE
Automatically adjust the image to have the best
brightness and focusing performance.
Control panel
BRT+/-
Manually adjust the brightness of the image.
Remote control /
Control panel
CAPTURE
Capture the image to the SD card (priority) or
internal memory.
Remote control /
Control panel
DELETE
Delete the image stored in the SD card (priority) or
internal memory.
Control panel
ENTER
Enter/Activate functions.
Remote control /
Control panel
FREEZE
Freeze the current image to temporarily stay on
the screen. Press again to defreeze.
Remote control /
Control panel
LAMP
Turn on / off the lamp.
Control panel
MENU
Activate the setting menu function/exit menu.
Remote control /
Control panel
PAN
Switch a part of the live image.
Remote control /
Control panel