Lumens PS660 - I Would Like to Switch a Part of the Live Image (PAN); I Would Like to Play the Slides (Slide Show)

English - 27
8.13.3. Playing image
1. Press [SOURCE] on the remote control or control panel to
display thumbnails of all video recorded.
2. Press [] or [] or [] or [] to select the thumbnail you want you
view.
3. Press [ENTER] for full-screen play.
4. Press [] or [] to turn to the previous/next video.
5. Press [SOURCE] to exit.
<Note> Only the MOV files recorded can be played and live
sound output is not available; additional amplifier can be
connected to the PHONE port.
8.14 I would like to switch a part of the live image
(PAN)
If you use the remote control or the control panel:
1. Press [PAN] to enter the image pan mode
2. Press [] or [] or [] or [] to move and view the partial enlarged
images.
3. Press [PAN] to exit the partial enlarged mode.
8.15 I would like to play the slides (Slide Show)
8.15.1 Setting the slide show effect:
1. Press [MENU] on the remote control or control panel to enter the
setting menu.
2. Press [] or [] to the [Storage] menu.
3. Press [] to find the [Slide Show Effect].
4. Press [] or [] to select image switch mode between [Off / Shutter /
Right / Down / Side / Open].
5. Press [MENU] to exit.
8.15.2 Setting delay time
1. Press [MENU] on the remote control or control panel to enter the
setting menu.
2. Press [] or [] to the [Storage] menu.
3. Press [] to find [Delay].
4. Press [] or [] to select image switch mode between [1 Sec / 3 Sec /
5 Sec / 10 Sec / Manual].