Lumens PS660 - Chapter 9 Connecting to Microscope

English - 38
Chapter 9 Connecting to Microscope
1 Mount the microscope adaptor onto the microscope.
<Note> Please choose an appropriate microscope adapter. Microscope
adapter accessories are applicable to eyepieces of Ø 28mm, Ø 31mm,
Ø 33mm, and Ø 34mm.
2 The lens of PS660 connects with the microscope adaptor.
3 Select the [Microscope] Mode
3.1. If you use the remote control or the control panel
3.1.1. Press [MENU] to enter the setting menu.
3.1.2. Press [] or [] to the [Display].
3.1.3. Press [] to select [Mode].
3.1.4. Press [] or [] to the [Microscope].
4 If the image is not clear
4.1. Please adjust the focus of microscope.
4.2. Please press the remote control [AF] button to activate the auto focus.
5 Digital Zoom
5.1. Press [MENU] on the remote control or control panel to enter the setting
menu.
5.2. Press [] or [] to the [Display].
If the eyepiece is Ø 33mm or
Ø 34mm, only one Lumens
microscope adapter is needed.
If the eyepiece is Ø 28mm or Ø 31mm,
you need two microscope adapters.
(1. The Lumens microscope adapter.
2. The microscope adapter suitable
for the eyepiece size Ø 28mm or
Ø 31mm).