Lumens PS660 - Chapter 8 Descriptions of Major Functions; I Would Like to Switch Image Sources; I Would Like to Switch Image Sources from PC 1;PC 2; I Would Like to Make Text Clearer and Photos more Colorful

English - 23
Chapter 8 Descriptions of major
functions
8.1 I would like to switch image sources
The default of image source is Live Image. Press [SOURCE] on the remote
control or the control panel to switch settings and PS660 will switch
among the following three modes in turn:
1. Live images (default).
2. SD card (priority) or internal memory.
3. PC.
8.2 I would like to switch image sources from PC 1/PC 2
If you use the remote control or the control panel:
1. Press [VGA] to switch image sources from PC 1 or PC 2.
<Remark> Refer to PS660 Quick Start Guide 3. Connect Devices - 3.2.5
Connecting to a PC
8.3 I would like to make text clearer and photos more
colorful
The default of [PHOTO/TEXT] is PHOTO. Use the remote control or the
control panel to change settings.
 [Photo] (default): for viewing photos or text with photos and will make the
photos more colorful.
 [Text]: for viewing text files and will make the text clearer.
 [Gray]: for viewing black and white photos and will make the grayscale
differentiation more distinct.
1. Press [MENU] to enter the setting menu.
2. Press [] or [] to select [Display].
3. Press [] to select [Photo/Text].
4. Press [] or [] to select [Photo/Text/Grey] (Refer to the previous
section to make the most appropriate selection).
5. Press [MENU] to exit.