Lumens PS752

English - 30
1. Press [MASK] key to enter the Mask/Spotlight mode menu. Press
[] or [] to select mode.
2. Press [ENTER] to enter the mask or spotlight mode.
3. Press [], [], [], or [] to move the zone position.
4. Press [MASK] again to return to live image.
Use control panel:
1. Press [MENU] to activate the setting menu.
2. Press [] or [] to select [Mask]. Press [ENTER] to activate mask
mode or select [Spotlight] and press [ENTER] to activate spotlight
mode.
3. Press [], [], [], or [] to move the zone position.
4. Press [MENU] to activate the image OSD menu.
5. Press [] or [] to select [Live Image].
6. Press [ENTER] to return to live image.
7.19.2 I would like to set the size of mask
In Mask mode, use the remote control or control panel:
1. Press [MENU] to activate the image OSD menu.
2. Press [] or [] to select the item to be modified
[Transparency/Step/
V Size/H Size]. (For details, please refer to 6.2 Setting Menu.)
3. Press [] or [] to perform the modification.
4. Press [MENU] to exit the image OSD menu and return to the mask
mode.
7.19.3 I would like to set spotlight function
In Spotlight mode, use the remote control or control panel:
1. Press [MENU] to activate the image OSD menu.
2. Press [] or [] to select the item to be modified
[Shape/Transparency/ Step/V Size/H Size]. (For details, please
refer to 6.2 Setting Menu.)
3. Press [] or [] to perform the modification.
4. Press [MENU] to exit the image OSD menu and return to spotlight
mode.
7.20 I would like to play the slides (Slide Show)
7.20.1 Setting delay time
1. Press [MENU] on the remote control or control panel to activate
the setting menu.