Lumens PS752 - I Would Like to Compare Images (Compare Live Images with Stored Image Files (PIP))

English - 31
2. Press [], [], [], or [] to select [Setting].
3. Press [ENTER] to activate.
4. Press [] or [] to the [Storage] menu.
5. Press [] to find [Delay].
6. Press [] or [] to select the delay time between [0.5 sec/1 sec/
3 sec/5 sec/10 sec/Manual].
7. Press [MENU] to exit.
7.20.2 Playing/Pausing/Stopping the slide show
<Note> Upper limit: The maximum size of single photo is 7 MB.
If you use the remote control or the control panel
1. Press [MENU] to activate the setting menu.
2. Press [], [], [], or [] to select [Slide Show].
3. Press [ENTER] to play.
4. Press [ENTER] again to pause/play.
5. Press [MENU] to exit.
7.21 I would like to compare images (compare live images
with stored image files (PIP))
This function will compare and contrast a live image with a stored image.
Remote control:
1. Press [Playback] to activate the Playback image thumbnails.
2. Press [], [], [], or [] to select the file to be compared.
3. Press [PIP] to execute image comparison.
4. Press [], [], [], or [] to move the live image.
5. Repeat Steps 1 - 3 to change other image files.
6. Press [MENU] to exit.
Control panel:
1. Press [MENU] to activate the setting menu.
2. Press [], [], [], or [] to select [PIP].
Stored imageLive image
C1
C5
C2
C6
C10 C11 C12
C3
C7
C4
C8