English - 43
(1) to VGA IN.
VGA IN/HDMI IN
image output is
not available
through USB
13 The output
image is not
clear with water
ripples
Please refer to the Appendix 1 in the manual to confirm
the applicable voltage frequency, and reset it according
to the instruction in Chapter 10 DIP Switch Setting.
14 The data in the
USB flash drive
cannot be read.
1. The USB flash drive with the capacity of 4 G and
above is recommended (up to 32 G supported)
2. Please make sure the file was saved at the specified
path: \DCIM\100MEDIA. (E.g.: J: \DCIM\100MEDIA)
3. Please make sure the file is named appropriately,
e.g. four English letters + four numbers. (E.g.:
LUMN0001.JPG)
To Next Page
Loading...
Need help?
General
