Lust CM-CAN1 - User level in operation over CAN bus; Further documentation

User Manual CM-CAN1
1-3
1 General introduction
DE
EN
1
2
3
4
5
6
7
A
1.3 User level in
operation over
CAN bus
The CAN BUS INTERFACE always operates on a high user level on the
relevant drive unit. The user level corresponds to parameter 1-MODE in
subject area _36KP, but cannot be influenced by way of it. Some of the
parameters at those user levels are service parameters, and are not
documented in the Operation Manuals of the individual devices.
Note: Unintentional write access to such parameters may severely
impair the functioning of the device!
1.4 Further
documentation
• Operation Manual for commissioning of the drive unit
• Application Manual for additional parameter setting to adapt to the
application. The Application Manual can be downloaded as a PDF
file from our website (http://www.lust-tec.de). Follow the Service link.
• Engineering Guide CDA3000
• ISO 11898, Road Vehicles, Interchange of digital information -
Controller Area Network (CAN) for high-speed communication
• CiA/DS20x : CAN Application Layer for Industrial Applications
• CiA/DS 102-1 : CAN Physical Layer for Industrial Applications -
Part 1: Two Wire Differential Transmission