Lust CM-CAN1 - Programmable error responses

6-2
User Manual CM-CAN1
6 Fault rectification
6.1 Programmable
error responses
In case of error, this state is indicated by the LEDs on the drive unit, by
the red backlighting of the K
EYPAD and by the device status word.
In all error cases the drive unit disables the power stage, if the default
error response is set. The error response is programmable for each error
in four stages.
In the error state the devices can still be operated by way of the K
EYPAD
and all connected bus systems (except the control function).
Figure 6.1 The error responses can be programmed with the parameter edi-
tor. The screenshot shows the factory setting.
Figure 6.2 Possible error responses