Lust CM-CAN1 - Page 67

User Manual CM-CAN1
6-3
6 Fault rectification
DE
EN
1
2
3
4
5
6
7
A
Notes on error handling in the drive unit
Error memory: The last four error messages are stored in the device in
parameters 95-ERR1 to 98-ERR4.
The error message E-OFF (power failure) is only entered in the error
memory in the event of brief power failures (the device does not shut
down completely before the power is restored).
Warning message: If the parameter setting for response to an error is a
warning message (WRN), the device indicates the warning by way of an
appropriately parameterized digital output (e.g.: 242 -FOS02 = WARN).
No other device response occurs. Safety-related errors cannot be set as
warnings in the parameters.
Error location: On the K
EYPAD the error
(1) and, for more precise error definition,
the error location (2) are shown at the top
left of the display. On the D
RIVEMANAGER a
window indicating possible error causes
and remedies appears in case of error.
VAL
(2)
(1)