User Manual CM-CAN1
6-5
6 Fault rectification
DE
EN
1
2
3
4
5
6
7
A
Overview of all CDA3000 error messages
Note: For a detailed list of all error messages together with reme-
dial measures refer to the Application Manual.
Error no. Error Description
1 E-CPU Hardware or software error
2 OFF Power failure
3 E-OC Current overload shut-off
4 E-OV Voltage overload shut-off
5 E-OLI IxIxt shut-off
6 E-OLM Ixt shut-off
7 E-OTM Motor overheating
8 E-OTI Drive unit overheating
9 E-PLS Plausibility error in parameter or program sequence
10 E-PAR Faulty parameter setting
11 E-FLT Floating point error
12 E-PWR Power pack not recognized
13 E-EXT External error message (input)
14 E-USR Reserved for modified software
15 E-OP1 Error in module in option slot 1
16 E-OP2 Error in module in option slot 2
17 E-WRN Warnings
18 E-SIO Error in serial interface
19 E-EEP Faulty EEPROM
20 E-WBK Wire break
21 E-SC Auto-tuning
22 E-PF PowerFail
23 E-RM InitRunMode
24 E-FDG Transmission error in reference coupling
25 E-LSW Limit switches reversed
Table 5.11 Error messages
To Next Page
Loading...