1. FEATURES
* TFT Display to easy reading measument result.
* Analysis for 3 phase multi-power system, 1P/2W, 1P/3W,
3P/3W, 3P/4W.
* Voltage and the Current are the True RMS value.
* 3 current probes ( CP-1201 ) are included, if change the
current probes, the calibration procedures are not
necessary.
* Current probe input signal/ranges with selection :
Input signal (ACV) :
200 mV/300 mV/500 mV/1 V/2 V/3 V.
Ranges (ACA) :
20 A/200 A/2000 A ( 1200 A )/30 A/300A /3000 A
60 A/600 A/6000 A.
* Meter can cooperate the universal current probes.
* Complete set with 4 PCs Test Leads, 4 PCs Alligator clips,
3 PCs Clamp Probe ( CP 1201 ), AC to DC 9V adapter, 4
G SD memory card and Carrying bag.
* Measurement :
V (phase-to-phase), V (phase-to-ground)
A (phase-to-ground)
KW ( True Power )/ KVA / KVAR / PF (phase)
KW ( True Power )/ KVA / KVAR / PF (system)
KWH / KVAH / KVARH / PFH (system)
Phase angle
* Harmonics display (1-50th order).
* Simultaneous display of Harmonics and Waveform.
* Display of Waveform with Peak Values.
* Analysis of Total Harmonic Distortion ( THD ).
* Graphic Phase diagram with 3-Phase system parameters.
* 3 phase Voltage or Current Unbalanced Ratio ( VUR, AUR )
and Unbalanced Factor.
* Calculated Unbalanced Current through Neutral Line ( An )
* Capture Transient events (including Dip, Swell and
Outage ) with programmable threshold ( % ).
* Programmable CT ratio ( 1 to 600 ) and PT ratio ( 1 to 1000 )
1
To Next Page
Loading...
