5-13 BACKLIGHT KEY
Depending on the brightness of the environment,
can choose from 3rd-order LCD Backlight brightness.
5-14 A Range ( Current Range ) KEY function
a) The A Range ( Current Range ) function key is used to
change the current range quickly.
b) Press A RANGE KEY once will entry to screen
as following " screen 1 ( 5-14 ) " , it is the same
screen as " screen 2 ( 4-5-13 ) , page 38 ".
c) The detail Current range Setting procedures, please
refer to section " 4-5-13 A range Setting ( Current
range Setting ), page 37 "
Remark :
The function of the " A Range ( Current Range )
key " is available for the Clamp Type, A Range,
V Range setting only.
screen 1 ( 5-14 )
Folder Name: WTA01
3P401001.XLS
REC Date: 2008-11-28 00:03:17
Sampling Time: 2 Trans Ref : 220.0 V
Delete File: 0 % SDVP 10% 0
SD Format: 0 % Decimal: Basic
Use Size: 388 KB Clamp Type: CP1201
Free Size: 1946 MB
200A
Total Size: 1946 MB V Range: 200mV
RS232 Out Sel:
PT: 1 : 1 V1 I1 P1
CT: 1 : 1 S1 Q1 PF1
Beep: ON Φ1 FREQ
Year Month Date Hour Minute Second
2010 11 13 14 37 25
66
To Next Page
Loading...
